Ana içeriğe atla

Excel'deki başka bir hücre değerine dayalı bir hücre nasıl gölgelendirilir?

Bir hücreyi (A1 diyor) belirli bir arka plan rengiyle gölgelemek istediğinizi varsayarsak, eğer B4 hücresi belirli bir değere sahipse veya değer belirli bir sayıdan büyük veya küçükse gibi ölçütleri karşılıyorsa. Sen ne yapardın? Bu makale size yöntemi gösterecektir.

Koşullu Biçimlendirme ile bir hücreyi başka bir hücre değerine göre gölgelendirin


Koşullu Biçimlendirme ile bir hücreyi başka bir hücre değerine göre gölgelendirin

Excel'deki başka bir hücre değerine göre bir hücreyi gölgelendirmek için aşağıdaki işlemleri yapabilirsiniz.

1. Başka bir hücre değerine göre gölgelendirmek istediğiniz hücreyi (A1 diyor) seçin ve ardından Koşullu biçimlendirme > Yeni kural altında Ana Sayfa sekmesi.

2. içinde Yeni Formatlama Kuralı iletişim kutusu, yapmanız gerekenler:

  • 2.1 Seçin Biçimlendirilecek hücreleri belirlemek için bir formül kullanın seçeneği Bir Kural Türü seçin Kutu;
  • 2.2 B1'ün değeri 4'den büyük olduğunda A500 hücresini gölgelemek istiyorsanız, o zaman formülü girin = $ B4> 500 içine Bu formülün geçerli olduğu değerleri biçimlendir Kutu;
    İpuçları: B1 "test" gibi belirli bir değere sahipken A4 hücresini gölgelemek istiyorsanız, bu formülü kullanın = $ B4 = "test". Formüldeki değişkeni ihtiyaçlarınıza göre değiştirebilirsiniz.
  • 2.3 oluşturulan arka plan rengini belirtmek için düğme;
  • 2.4 OK düğmesine döndüğünde Yeni Formatlama Kuralı iletişim kutusu. Ekran görüntüsüne bakın:

Ardından, belirtilen hücrenin, aşağıda gösterilen ekran görüntüsü gibi başka bir hücrenin değerine göre gölgelendirildiğini görebilirsiniz.


İlgili yazılar:

En İyi Ofis Üretkenlik Araçları

🤖 Kutools AI Yardımcısı: Aşağıdakilere dayalı olarak veri analizinde devrim yaratın: Akıllı Yürütme   |  Kodunu oluşturun  |  Özel Formüller Oluşturun  |  Verileri Analiz Edin ve Grafikler Oluşturun  |  Kutools İşlevlerini Çağır...
Popüler Özellikler: Yinelenenleri Bul, Vurgula veya Tanımla   |  Boş Satırları Sil   |  Veri Kaybı Olmadan Sütunları veya Hücreleri Birleştirin   |   Formülsüz Tur ...
Süper Arama: Çoklu Ölçütlü VLookup    Çoklu Değer VLookup  |   Birden Çok Sayfada VLookup   |   Bulanık Arama ....
Gelişmiş Açılır Liste: Hızla Açılır Liste Oluşturun   |  Bağımlı Açılır Liste   |  Çoklu Seçim Açılır Liste ....
Sütun Yöneticisi: Belirli Sayıda Sütun Ekleme  |  Sütunları Taşı  |  Gizli Sütunların Görünürlük Durumunu Değiştir  |  Aralıkları ve Sütunları Karşılaştırın ...
Öne Çıkan Özellikler: Izgara Odağı   |  Tasarım görünümü   |   Büyük Formül Çubuğu    Çalışma Kitabı ve Sayfa Yöneticisi   |  Kaynak Kütüphanesi (Otomatik metin)   |  Tarih Seçici   |  Çalışma Sayfalarını Birleştirin   |  Hücreleri Şifrele/Şifresini Çöz    E-postaları Listeye Göre Gönder   |  Süper Filtre   |   Özel Filtre (kalın/italik/üstü çizili filtre...) ...
En İyi 15 Araç Seti12 Metin Tools (Metin ekle, Karakterleri Kaldır, ...)   |   50+ Grafik Türleri (Gantt şeması, ...)   |   40+ Pratik Formüller (Yaşı doğum gününe göre hesapla, ...)   |   19 sokma Tools (QR Kodunu Girin, Yoldan Resim Ekle, ...)   |   12 Dönüştürme Tools (Sayılardan Kelimelere, Para Birimi Dönüştürme, ...)   |   7 Birleştir ve Böl Tools (Gelişmiş Kombine Satırları, Bölünmüş hücreler, ...)   |   ... ve dahası

Kutools for Excel ile Excel Becerilerinizi Güçlendirin ve Daha Önce Hiç Olmadığı Gibi Verimliliği Deneyimleyin. Kutools for Excel, Üretkenliği Artırmak ve Zamandan Tasarruf Etmek için 300'den Fazla Gelişmiş Özellik Sunar.  En Çok İhtiyacınız Olan Özelliği Almak İçin Buraya Tıklayın...

Açıklama


Office Tab, Office'e Sekmeli Arayüz Getirir ve İşinizi Çok Daha Kolay Hale Getirir

  • Word, Excel, PowerPoint'te sekmeli düzenlemeyi ve okumayı etkinleştirin, Publisher, Access, Visio ve Project.
  • Yeni pencereler yerine aynı pencerenin yeni sekmelerinde birden çok belge açın ve oluşturun.
  • Üretkenliğinizi% 50 artırır ve her gün sizin için yüzlerce fare tıklamasını azaltır!
Comments (17)
Rated 4 out of 5 · 1 ratings
This comment was minimized by the moderator on the site
I just wanted to leave my experience after reading the comments left here when in need of accomplishing entire columns needing to correlate to their respective rows under another column.
I hope I can help out the community for anyone else in search for answers with the same needs as I had.

This example is if you need each cell to act independently according to a cell in its own respective row. For example: Looking at row 4 I need my cell in column H to change color based on a value in column F (still in row 4). Lets say in this case I need H4 to change when the word Complete is entered in F4. (But I need this rule to apply for all rows. -Lets say I have 104 rows total.)

Conditional Formatting: New Rule > "Use a formula to determine which cells to format" - Format values where this formula is true: (enter the following) =$F1:$F104="Complete" (-Choose Format desired)
(We now need to add the cells this new rule applies to, enter the following) =$H$1:$H$104 > Apply > OK

You should now have independent rows formatting cells in column H dependent on the value "Complete" being entered in cells in column F.
Rated 4 out of 5
This comment was minimized by the moderator on the site
I have two column Buy Units (A) and Sell unites (B). When typing sell units B column, If B1>A1 return red font in B1 value. (To say that there is typo= you can not sale more unit than you have got) FOR EACH TRANSACTIONS. Meaning same to be applied for B2>A2, B3>A3., B4>A4... I do not want to keep typing Conditional Formating for each single cell, just want to COPY and Paste. This seems relatively easy ask but taking me a toll! Can you please help?
This comment was minimized by the moderator on the site
Yes I want learn/ know this
This comment was minimized by the moderator on the site
How do I solve this ?
Say I have 5 Columns - CORRECT_ANS, PERSON1, PERSON2, PERSON3, PERSON4
and say 4 rows with values as below.

CORRECT_ANS, PERSON1, PERSON2, PERSON3, PERSON4
A B C A A
B A B D B
C C C A B
C A D C C

Values in Columns PERSON1 to PERSON4 should match against corrresponding row in CORRECT_ANS. If value is same, then Cell color to be GREEN, else RED.
So in 1st case, PERSON3 and PERSON4 cell should be GREEN, rest RED. Similarly 2nd row, PERSON2 and PERSON4 gets GREEN, rest RED, and so on.
This comment was minimized by the moderator on the site
what if I want a cell to be shaded based on the presence or absence of text in a different cell?
This comment was minimized by the moderator on the site
If you want the condition to format several cells on the same row, select them all and use the formula =$J1="your_text_here"
This comment was minimized by the moderator on the site
HI what if I want to condition a cell based on the presence or not of text in a different cell?
This comment was minimized by the moderator on the site
To apply this to multiple rows, use the same formula (Excel automatically continues the formula with relative values).
e.g. for the following sheet,
_|_A_B
1| 0 0
2| 0 1
3| 1 0
4| 1 1
to make A1 depend on B1, and A2 depend on B2, and so forth, use =$B1=0. To make all the cells in A depend on one cell in B, use =$B$1=0, and to make the cells in A depend on the cells in the next row of B, use =$B2=0 (with the A cells selected from A1).
This comment was minimized by the moderator on the site
Ho do I apply this rule by row
For example, I want Cell I2 to be formatted by G2. I3 by G3 and so on
This comment was minimized by the moderator on the site
Hey for doing it by row, let's say I want to make A red when B > 0.

For that I would go to A, and enter the formula =B:B > 0

That's how you would do this
This comment was minimized by the moderator on the site
Hi,
I want to dpo the following. Help me out.
A1 to be green if B1>0
A2 to be green if B1>0
.
.
.
.
A250 to be green if B250>0

I am unable to copy the formula to all the rows.
This comment was minimized by the moderator on the site
How can we apply the rule on multiple cells with a single formula? Applying the rule on every single cell will be a hectic job.
This comment was minimized by the moderator on the site
How might i format column N to be shaded according to value in column L? (Eg higher red, lower blue, equals green, no value - no shading)
Can i write a formula for column N in conditional formatting?

K L M N
DD 0.2 0.8

AM 0.8 1.0

TB 1.0 1.0

AM 1.0 1.0

TB 0.6 0.8

AM 0.4 0.4

AM 0.8 0.8


Any help appreciated
D
This comment was minimized by the moderator on the site
Hi Deb,
Sorry can't help you with that. Thank you for your comment.
This comment was minimized by the moderator on the site
Hey Deb and Crystal,

For doing it by row, let's say I want to make A red when B > 0.

For that I would go to A, and enter the formula =B:B > 0

That's how you would do this
This comment was minimized by the moderator on the site
i want to know formula for color change of cell on basis of two different cell values
This comment was minimized by the moderator on the site
Hi Manish,
Please try this formula =AND($A2="KTE", $B2>100)
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations