Ana içeriğe atla

Excel'de tek tıklamayla düzenleme için hücreler nasıl etkinleştirilir?

Bu makale, Excel'de tek tıklamayla düzenleme için hücreleri etkinleştirmekten bahsediyor. Lütfen adım adım aşağıdaki işlemleri yapınız.

VBA koduyla tek tıklamayla düzenleme için hücreleri etkinleştirin


VBA kodu ile tek tıklama ile düzenleme için hücreyi etkinleştirin

Aşağıdaki VBA kodu, tek tıklamayla düzenleme için hücreleri etkinleştirmenize yardımcı olabilir.

1. Hücreleri tek tıklamayla etkinleştirmek için ihtiyacınız olan çalışma sayfasını açın. Sayfa Sekmesine sağ tıklayın ve Kodu Görüntüle sağ tıklama menüsünden.

2. Açılışta Uygulamalar için Microsoft Visual Basic penceresinde, aşağıdaki VBA kodunu kopyalayıp Kod pencere.

VBA kodu: Tek tıklamayla düzenleme için hücreyi etkinleştirin

#If Win64 Then
'Updated by Extendoffice 2018/2/2
    Private Declare PtrSafe Function GetAsyncKeyState Lib "user32" (ByVal vKey As Long) As Integer
    Private Declare PtrSafe Function GetKeyState Lib "user32" (ByVal nVirtKey As Long) As Integer
#Else
    Private Declare Function GetAsyncKeyState Lib "user32" (ByVal vKey As Long) As Integer
    Private Declare Function GetKeyState Lib "user32" (ByVal nVirtKey As Long) As Integer
#End If
Const VK_NUMLOCK = 144
Const VK_CAPITAL = 20
Const VK_SCROLL = 145
Dim xOldNLState As Long
Dim xOldCLState As Long
Dim xOldSLState As Long
Const KEY_MASK As Integer = &HFF80 '

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    If (GetKeyState(vbKeyShift) And KEY_MASK) <> 0 Then Exit Sub
    xOldNLState = GetAsyncKeyState(VK_NUMLOCK)
    xOldCLState = GetAsyncKeyState(VK_CAPITAL)
    xOldSLState = GetAsyncKeyState(VK_SCROLL)
    SendKeys "{F2}"
    If GetAsyncKeyState(VK_NUMLOCK) <> xOldNLState Then
        Application.SendKeys "{NUMLOCK}"
    End If
    If GetAsyncKeyState(VK_CAPITAL) <> xOldCLState Then
        Application.SendKeys "{CAPSLOCK}"
    End If
    If GetAsyncKeyState(VK_SCROLL) <> xOldSLState Then
        Application.SendKeys "{SCROLLLOCK}"
    End If
End Sub

3. Tuşuna basın. Ara Toplam + Q kapatmak için aynı anda tuşları Uygulamalar için Microsoft Visual Basic pencere.

Şu andan itibaren, mevcut çalışma sayfasındaki herhangi bir hücreye tek tıklandığında, hücre hemen etkinleştirilecektir.

En İyi Ofis Üretkenlik Araçları

🤖 Kutools AI Yardımcısı: Aşağıdakilere dayalı olarak veri analizinde devrim yaratın: Akıllı Yürütme   |  Kodunu oluşturun  |  Özel Formüller Oluşturun  |  Verileri Analiz Edin ve Grafikler Oluşturun  |  Kutools İşlevlerini Çağır...
Popüler Özellikler: Yinelenenleri Bul, Vurgula veya Tanımla   |  Boş Satırları Sil   |  Veri Kaybı Olmadan Sütunları veya Hücreleri Birleştirin   |   Formülsüz Tur ...
Süper Arama: Çoklu Ölçütlü VLookup    Çoklu Değer VLookup  |   Birden Çok Sayfada VLookup   |   Bulanık Arama ....
Gelişmiş Açılır Liste: Hızla Açılır Liste Oluşturun   |  Bağımlı Açılır Liste   |  Çoklu Seçim Açılır Liste ....
Sütun Yöneticisi: Belirli Sayıda Sütun Ekleme  |  Sütunları Taşı  |  Gizli Sütunların Görünürlük Durumunu Değiştir  |  Aralıkları ve Sütunları Karşılaştırın ...
Öne Çıkan Özellikler: Izgara Odağı   |  Tasarım görünümü   |   Büyük Formül Çubuğu    Çalışma Kitabı ve Sayfa Yöneticisi   |  Kaynak Kütüphanesi (Otomatik metin)   |  Tarih Seçici   |  Çalışma Sayfalarını Birleştirin   |  Hücreleri Şifrele/Şifresini Çöz    E-postaları Listeye Göre Gönder   |  Süper Filtre   |   Özel Filtre (kalın/italik/üstü çizili filtre...) ...
En İyi 15 Araç Seti12 Metin Tools (Metin ekle, Karakterleri Kaldır, ...)   |   50+ Grafik Türleri (Gantt şeması, ...)   |   40+ Pratik Formüller (Yaşı doğum gününe göre hesapla, ...)   |   19 sokma Tools (QR Kodunu Girin, Yoldan Resim Ekle, ...)   |   12 Dönüştürme Tools (Sayılardan Kelimelere, Para Birimi Dönüştürme, ...)   |   7 Birleştir ve Böl Tools (Gelişmiş Kombine Satırları, Bölünmüş hücreler, ...)   |   ... ve dahası

Kutools for Excel ile Excel Becerilerinizi Güçlendirin ve Daha Önce Hiç Olmadığı Gibi Verimliliği Deneyimleyin. Kutools for Excel, Üretkenliği Artırmak ve Zamandan Tasarruf Etmek için 300'den Fazla Gelişmiş Özellik Sunar.  En Çok İhtiyacınız Olan Özelliği Almak İçin Buraya Tıklayın...

Açıklama


Office Tab, Office'e Sekmeli Arayüz Getirir ve İşinizi Çok Daha Kolay Hale Getirir

  • Word, Excel, PowerPoint'te sekmeli düzenlemeyi ve okumayı etkinleştirin, Publisher, Access, Visio ve Project.
  • Yeni pencereler yerine aynı pencerenin yeni sekmelerinde birden çok belge açın ve oluşturun.
  • Üretkenliğinizi% 50 artırır ve her gün sizin için yüzlerce fare tıklamasını azaltır!
Comments (7)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
nice and understood
This comment was minimized by the moderator on the site
Is there a way to make it so that you can be in one program window an click into the window for excel and onto the cell in one click? I noticed, while it does go right to edit mode, it goes to the previous cell when you click into the program so that it still requires two clicks to start editing.
This comment was minimized by the moderator on the site
Sorry, not sure if my last post was published. Here it is again just in case:

Hey Everyone, first off, many thanks for posting this, it's a definite time saver. Just noticed that if you try to use the "Shift+tab" keyboard command to move one cell to the left, a comment box gets created instead. Anyway to fix this issue? Thanks!
This comment was minimized by the moderator on the site
Dear Wayne,
The code is now updated with the problem fixed. Thank you for your feedback.
This comment was minimized by the moderator on the site
Hey Everyone, first off, many thanks for posting this, it's a definite time saver. Just noticed that if you try to use the "Shift+tab" to move one cell to the left, a comment box gets created instead. Anyway to fix this issue? Thanks!
This comment was minimized by the moderator on the site
Hey guys. I had a question about a strange side effect this code does when I use it in one of my worksheets.
The code I tried was the one mentioned in the post.
//
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
SendKeys "{F2}"
End Sub
//
The side effect I'm getting is when I make a cell active my Numlock turns off/on.
Any help would be appreciated.
This comment was minimized by the moderator on the site
Good Day,
The code is updated with the problem solving. Thank you for your comment.
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations