Ana içeriğe atla

Outlook'ta aynı anda birden çok taslak nasıl gönderilir?

Taslaklar klasörünüzde birden fazla taslak mesaj varsa ve şimdi, bunları tek tek göndermeden tek seferde göndermek istiyorsunuz. Outlook'ta bu işle nasıl hızlı ve kolay bir şekilde başa çıkabilirsiniz?

Outlook'ta tüm taslak iletileri tek seferde VBA kodu ile gönderin


Outlook'ta tüm taslak iletileri tek seferde VBA kodu ile gönderin

Aşağıdaki VBA kodları, Taslaklar klasöründeki tüm veya seçilen taslak e-postaları tek seferde göndermenize yardımcı olabilir, lütfen şu şekilde yapın:

1. Basılı tutun ALT + F11 tuşlarını açmak için Uygulamalar için Microsoft Visual Basic pencere.

2. Sonra tıklayın Ekle > modül, aşağıdaki kodu kopyalayıp açılan boş modüle yapıştırın, ekran görüntüsüne bakın:

VBA kodu: Outlook'ta tüm taslak e-postaları bir defada gönderin:

Sub SendAllDraftEmails()
Dim xAccount As Account
Dim xDraftFld As Folder
Dim xItemCount As Integer
Dim xCount As Integer
Dim xDraftsItems As Outlook.Items
Dim xPromptStr As String
Dim xYesOrNo As Integer
Dim i As Long
Dim xCurFld As Folder
Dim xTmpFld As Folder
On Error Resume Next
xItemCount = 0
xCount = 0
Set xTmpFld = Nothing
Set xCurFld = Application.ActiveExplorer.CurrentFolder
For Each xAccount In Outlook.Application.Session.Accounts
    Set xDraftFld = xAccount.DeliveryStore.GetDefaultFolder(olFolderDrafts)
    xItemCount = xItemCount + xDraftFld.Items.Count
    If xDraftFld.EntryID = xCurFld.EntryID Then
        Set xTmpFld = xCurFld.Parent
    End If
Next xAccount
Set xDraftFld = Nothing
If xItemCount > 0 Then
   xPromptStr = "Are you sure to send out all the drafts?"
    xYesOrNo = MsgBox(xPromptStr, vbQuestion + vbYesNo, "Kutools for Outlook")
    If xYesOrNo = vbYes Then
        If Not xTmpFld Is Nothing Then
            Set Application.ActiveExplorer.CurrentFolder = xTmpFld
        End If
        VBA.DoEvents
        For Each xAccount In Outlook.Application.Session.Accounts
            Set xDraftFld = xAccount.DeliveryStore.GetDefaultFolder(olFolderDrafts)
            Set xDraftsItems = xDraftFld.Items
            For i = xDraftsItems.Count To 1 Step -1
                If xDraftsItems.Item(i).Recipients.Count <> 0 Then
                    xDraftsItems.Item(i).sEnd
                    xCount = xCount + 1
                End If
            Next
        Next xAccount
        VBA.DoEvents
        Set Application.ActiveExplorer.CurrentFolder = xCurFld
        MsgBox "Successfully sent " & xCount & " messages", vbInformation, "Kutools for Outlook"
    End If
Else
    MsgBox "No Drafts!", vbInformation + vbOKOnly, "Kutools for Outlook"
End If
End Sub

3. Ardından kodu kaydedin ve F5 Bu kodu çalıştırmak için tuşuna basın, tüm taslakları gönderip göndermediğinizi size hatırlatmak için bir istem kutusu açılır, Evet, ekran görüntüsüne bakın:

4. Ve kaç tane taslak e-postanın gönderildiğini size hatırlatmak için bir iletişim kutusu açılacaktır, ekran görüntüsüne bakın:

5. Ve sonra tıklayın OK düğmesi, içindeki tüm e-postalar Taslaklar klasör bir kerede gönderilecek, ekran görüntüsüne bakın:

Notlar:

1. Yukarıdaki kod, Outlook'unuzdaki tüm hesaplardan tüm taslak e-postaları gönderecektir.

2. Taslaklar klasöründen yalnızca belirli e-postalar göndermek istiyorsanız, lütfen aşağıdaki VBA kodunu uygulayın:

VBA kodu: Seçili e-postaları Taslaklar klasöründen gönderin:

Sub SendSelectedDraftEmails()
Dim xSelection As Selection
Dim xPromptStr As String
Dim xYesOrNo As Integer
Dim i As Long
Dim xAccount As Account
Dim xCurFld As Folder
Dim xDraftsFld As Folder
Dim xTmpFld As Folder
Dim xArr() As String
Dim xCount As Integer
Dim xMail As MailItem
On Error Resume Next
xCount = 0
Set xTmpFld = Nothing
Set xCurFld = Application.ActiveExplorer.CurrentFolder
For Each xAccount In Outlook.Application.Session.Accounts
    Set xDraftsFld = xAccount.DeliveryStore.GetDefaultFolder(olFolderDrafts)
    If xDraftsFld.EntryID = xCurFld.EntryID Then
        Set xTmpFld = xCurFld.Parent
    End If
Next xAccount
If xTmpFld Is Nothing Then
    MsgBox "The current folder is not a draft folder", vbInformation, "Kutools for Outlook"
    Exit Sub
End If
Set xSelection = Outlook.Application.ActiveExplorer.Selection
If xSelection.Count > 0 Then
    xPromptStr = "Are you sure to send out the selected " & xSelection.Count & " draft item(s)?"
    xYesOrNo = MsgBox(xPromptStr, vbQuestion + vbYesNo, "Kutools for Outlook")
    If xYesOrNo = vbYes Then
        ReDim xArr(xSelection.Count - 1)
        For i = 1 To xSelection.Count
            xArr(i - 1) = xSelection.Item(i).EntryID
        Next
        Set Application.ActiveExplorer.CurrentFolder = xTmpFld
        VBA.DoEvents
        For i = 0 To UBound(xArr)
            Set xMail = Application.Session.GetItemFromID(xArr(i))
            If xMail.Recipients.Count <> 0 Then
                xMail.sEnd
                xCount = xCount + 1
            End If
        Next
        VBA.DoEvents
        Set Application.ActiveExplorer.CurrentFolder = xCurFld
        MsgBox "Successfully sent " & xCount & " messages", vbInformation, "Kutools for Outlook"
    End If
Else
    MsgBox "No items selected!", vbInformation, "Kutools for Outlook"
End If
End Sub

İlgili Makaleler:

Outlook'ta Bireysel Olarak Birden Fazla Alıcıya E-posta Nasıl Gönderilir?

Outlook Üzerinden Excel'den Bir Listeye Kişiselleştirilmiş Toplu E-postalar Nasıl Gönderilir?

Outlook'ta Bireysel Olarak Birden Fazla Alıcıya Bir Takvim Nasıl Gönderilir?

Outlook'ta Bilmeden Birden Çok Alıcıya Nasıl E-posta Gönderilir?


En İyi Ofis Üretkenlik Araçları

Outlook için Kutools - Outlook'unuzu Güçlendirecek 100'den Fazla Güçlü Özellik

🤖 AI Posta Yardımcısı: Yapay zeka büyüsüyle anında profesyonel e-postalar: tek tıkla dahice yanıtlar, mükemmel ton, çok dilli ustalık. E-posta göndermeyi zahmetsizce dönüştürün! ...

???? E-posta Otomasyonu: Ofis Dışında (POP ve IMAP için kullanılabilir)  /  E-posta Gönderimini Planla  /  E-posta Gönderirken Kurallara Göre Otomatik CC/BCC  /  Otomatik İletme (Gelişmiş Kurallar)   /  Otomatik Karşılama Ekleme   /  Çok Alıcılı E-postaları Otomatik Olarak Bireysel Mesajlara Bölün ...

📨 E-posta Yönetimi: E-postaları Kolayca Geri Çağırın  /  Dolandırıcılık E-postalarını Konulara ve Diğerlerine Göre Engelleyin  /  Yinelenen E-postaları Silin  /  gelişmiş Arama  /  Klasörleri Birleştir ...

📁 Ekler ProToplu Kaydetme  /  Toplu Ayır  /  Toplu Sıkıştırma  /  Otomatik kaydet   /  Otomatik Ayır  /  Otomatik Sıkıştır ...

🌟 Arayüz Büyüsü: 😊Daha Fazla Güzel ve Havalı Emoji   /  Sekmeli Görünümlerle Outlook Verimliliğinizi Artırın  /  Outlook'u Kapatmak Yerine Küçültün ...

👍 Tek Tıklamayla Harikalar: Tümünü Gelen Eklerle Yanıtla  /   Kimlik Avına Karşı E-postalar  /  🕘Gönderenin Saat Dilimini Göster ...

👩🏼‍🤝‍👩🏻 Kişiler ve Takvim: Seçilen E-postalardan Toplu Kişi Ekleme  /  Kişi Grubunu Bireysel Gruplara Bölme  /  Doğum Günü Hatırlatıcılarını Kaldır ...

üzerinde 100 Özellikler Keşfinizi Bekleyin! Daha Fazlasını Keşfetmek İçin Buraya Tıklayın.

 

 

Comments (15)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Hi guys. Thought I'd share. Here's my code for sending all drafts:
Sub SendAllDrafts() 'By

If MsgBox("Are you sure you want to send ALL the items in your drafts folder?", _
vbQuestion + vbYesNo) <> vbYes Then Exit Sub

Dim myNamespace As Outlook.NameSpace 'Change view to Inbox to avoid inline error
Set myNamespace = Application.GetNamespace("MAPI") 'Change view to Inbox to avoid inline error
Set Application.ActiveExplorer.CurrentFolder = _
myNamespace.GetDefaultFolder(olFolderInbox) 'Change view to Inbox to avoid inline error

Dim fldDraft As MAPIFolder, msg As Outlook.MailItem, intCount As Integer
Set fldDraft = Outlook.GetNamespace("MAPI").GetDefaultFolder(olFolderDrafts) 'Sends all drafts in your main drafts folder. For a subfolder, add .Folders("folder name")
intCount = 0
Do While fldDraft.Items.count > 0
Set msg = fldDraft.Items(1)
msg.Send
intCount = intCount + 1
Loop
If Not (msg Is Nothing) Then Set msg = Nothing
Set fldDraft = Nothing
MsgBox intCount & " messages sent", vbInformation + vbOKOnly

End Sub
This comment was minimized by the moderator on the site
This code sends all drafts in a subfolder called Merge Tools (it asks you before sending). I'm sure you guys can edit it to suit your needs though. It's far simpler. Enjoy :)
Sub SendAllMergeToolsDrafts()

If MsgBox("Are you sure you want to send ALL the items in your Merge Tools drafts folder?", _
vbQuestion + vbYesNo) <> vbYes Then Exit Sub

Dim myNamespace As Outlook.NameSpace 'Change view to Inbox to avoid inline error
Set myNamespace = Application.GetNamespace("MAPI") 'Change view to Inbox to avoid inline error
Set Application.ActiveExplorer.CurrentFolder = _
myNamespace.GetDefaultFolder(olFolderInbox) 'Change view to Inbox to avoid inline error

Dim fldDraft As MAPIFolder, msg As Outlook.MailItem, intCount As Integer
Set fldDraft = Outlook.GetNamespace("MAPI").GetDefaultFolder(olFolderDrafts).Folders("Merge Tools") 'Sends all drafts in the Merge Tools folder only
intCount = 0
Do While fldDraft.Items.count > 0
Set msg = fldDraft.Items(1)
msg.Send
intCount = intCount + 1
Loop
If Not (msg Is Nothing) Then Set msg = Nothing
Set fldDraft = Nothing
MsgBox intCount & " messages sent", vbInformation + vbOKOnly

End Sub
This comment was minimized by the moderator on the site
Hi, quick question maybe you have an Idea. We have an external application that saves all mails to the drafts folder. if i run the macro we have the problem, that only the first mail in the list is beeing sent correctly, all other mails are deferred because it adds quote marks ' ' to the mail adress.Is there a way to avoid this?
This comment was minimized by the moderator on the site
Can you explain why the last mail (i = 1) is recreated in a new MailItem instead of just .Send?

Thanks.
This comment was minimized by the moderator on the site
We used the script to send all draft emails at once for a batch of statement emails generated from sage 200. The emails in the sent items look fine but customers are are receiving them with the body text in Chinese! Any ideas what could be happening here?
This comment was minimized by the moderator on the site
Anybody get some emails sent to the deleted folder doing this?
This comment was minimized by the moderator on the site
Same problem: if you select 4 messages, after sending three of them ar in trash folder (because of the "xDraftsItems.Item(i).Delete" statement)
This comment was minimized by the moderator on the site
Hi, Bill,
Do you want to send multiple selected emails from deleted foder?
Please give your problem more detailed, thank you!
This comment was minimized by the moderator on the site
Hi skyyang, Im facing the same problem. I draft usually 15-20 emails and then use this code to send them all at once, but later realise that one of those emails do not get sent, rather they are sent to my 'Deleted' folder. Even the prompt says the correct number of emails for eg: '20 emails sent' but when I check, only 19 would have been sent, one I will find it lying in my deleted items folder. I want all the emails to be sent to their recipients without error. Can you please tell me why this happens. Please help.
This comment was minimized by the moderator on the site
Hi, Darewin,We have updated the above codes, please try again, thank you!
This comment was minimized by the moderator on the site
I have multiple exchange accounts. I want to have one of the accounts that isn't my default to be the sender. Where would I insert this in the code? Thanks!
This comment was minimized by the moderator on the site
Copied as per above but when I press F5 nothing happens
This comment was minimized by the moderator on the site
Hi, Cathleen,
The above code works fine in my Outlook, which Outlook version do you use?
This comment was minimized by the moderator on the site
Brilliant, worked a charm, thank you :)
This comment was minimized by the moderator on the site
einfach nur perfekt. Herzlichen Dank
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations