Ana içeriğe atla

Excel'de çok sayıda satırı ve sütunu kolayca okuma / görüntüleme

Kutools for Excel

Excel'i 300+ ile Güçlendirir
Güçlü Özellikler

Eğer çalışma sayfasında çalışıyorsanız yüzlerce satır ve sütundan oluşan devasa veriler içeriyorsa, verileri kontrol ederken ve birinden diğerine atlarken kolayca bulmacalarla karşılaşıyor olabilirsiniz ve bu da zaman kaybına neden olur. Bu sorunu çözmek için, Kutools for Excel'in Grid Focus yardımcı programı, aktif hücreyi veya aralığı aşağıda gösterilen ekran görüntüsü gibi olağanüstü hale getirmek için satır ve sütun boyunca vurgular. Gösteri

atış okuma düzeni 2


Izgara Odağı yardımcı programını etkinleştirin

Tıkla Kutools > Izgara Odağı bu yardımcı programı etkinleştirmek için Izgara Odağı etkinleştirildiğinde sekme vurgulanır.
atış okuma düzeni 2


Izgara Odağı ayarları

Şekiller, stiller, renkler veya şeffaflık gibi ayarları değiştirmek isterseniz, şu adrese gidebilirsiniz: Izgara Odak Ayarıdeğiştirilecek iletişim kutusu.

Tıkla Kutools sekmesine gidin ve yanındaki oka tıklayın Izgara Odağı açılır menüyü genişletmek için, ardından Izgara Odağı Ayarları.
atış okuma düzeni 2

içinde Izgara Odağı Ayarları iletişim kutusu, istediğiniz şekli, stili, rengi ve şeffaflığı değiştirebilir, aynı zamanda değişiklikleri önizleyebilirsiniz. Önizleme değişiklikleri uygulamadan önce bölümü.
atış okuma düzeni 2

Hakkımızda Aktif hücre alanını vurgulayın ve Hücrenin düzenlenmesinde alanı vurgulayın seçenekleri.

Kene Aktif hücre alanını vurgulayın seçeneği, etkin hücre veya aralık vurgulanacaktır.

atış okuma düzeni 2

İşareti kaldır Aktif hücre alanını vurgulayın seçenek, ancak işaretleyin Hücrenin düzenlenmesinde alanı vurgulayın seçeneği, etkin hücre veya aralık vurgulanmaz, ancak taşan alan vurgulanır.

atış okuma düzeni 2

İkisinin de işaretini kaldırın Aktif hücre alanını vurgulayın ve Hücrenin düzenlenmesinde alanı vurgulayın seçenekler, hem aktif hücre veya aralık hem de taşan alan vurgulanmayacaktır.

atış okuma düzeni 2

Kılavuz Odağı Etkinleştir: ayarlardan sonra bu seçeneği işaretleyin ve OK, Izgara Odağı otomatik olarak etkinleştirilecektir.

Varsayılan ayarları: bu düğmeyi tıklayın, Grid Focus ayarları varsayılan ayarlara geri yüklendi. Kutools.


Notlar:

1. Tıklayarak bu yardımcı programı iptal edebilirsiniz. Izgara Odağı komut, sekme açık griye dönüşür.

2. Birden çok Excel dosyası açarsanız, bu Izgara Odağı özellik hepsine uygulanır.

3. Bu Izgara Odağı çalışma kitabını bir dahaki sefere başlattığınızda otomatik olarak etkinleştirilmeyecek.

Izgara Odak Demosu


Kutools for Excel: 300'den fazla kullanışlı araç parmaklarınızın ucunda! Hiçbir özellik sınırlaması olmaksızın 30 günlük ücretsiz deneme sürenizi bugün başlatın. Hemen İndir!

    Verimlilik Araçları Önerilir
    Aşağıdaki araçlar zamandan ve paradan büyük ölçüde tasarruf sağlayabilir, hangisi sizin için doğru?
    Office Tab: Ofisinizde kullanışlı sekmeleri kullanma, Chrome, Firefox ve Yeni Internet Explorer'ın yolu olarak.
    Kutools for Excel: Excel için 300'den fazla Gelişmiş İşlev 2021, 2019, 2016, 2013, 2010, 2007 ve Office 365.

    Kutools for Excel

    Yukarıda açıklanan işlevsellik, Kutools for Excel'in 300 güçlü işlevinden yalnızca biridir.

    Excel(Office) 2021, 2019, 2016, 2013, 2010, 2007 ve Office 365 için tasarlandı. 30 gün boyunca ücretsiz indirin ve kullanın.

    Kutools for Excel'in ekran görüntüsü

    btn daha fazla oku      btn indir     btn satın alma

Comments (17)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Why doesn't it open automatically at startup? it would be nice to remember the last setting
This comment was minimized by the moderator on the site
Hello, Mennan,
Sorry for the inconvenience, for the stability of the function, our feature is disabled when opening next time at present, but the last setting and operation can be remembered.
Thanks for your comment.
This comment was minimized by the moderator on the site
I have a problem with the reading layout. Every time when I start it, it behaves strangely. It "chose" a smaller size of the sheet than it is actually on my screen and it works in that sheet. Eg: if I see on my screen columns range from A up to AC and rows range from 1 up to 39, the reading layout chooses that my columns range from A up to half of X and rows range from 1 up to half of 32 and works in that let's call it window.
I tried to uninstall kutools and install it again, but the same problem remains.
Any wise advice would be appreciated from my side.
I am running MS office professional plus 2021.

Thanks in advance
This comment was minimized by the moderator on the site
I might detected the problem. I am running 3 displays, one from a laptop 15,6" and two others 24" over wavlink dock. All three displays are running at a resolution of 1920 x 1080. My main display is from the laptop.
I am using excel on another two 24" displays just because they have a bigger screen. When I put excel on the laptop window reading layout behaves as it should, and that is the exact size of the sheet that I previously described as a smaller window.
This comment was minimized by the moderator on the site
Hello, Dejan,
Thanks for your comment.
I have fed back this problem to the developers, if there is a an upgrade or fixed, we will let you know in the first time.
This comment was minimized by the moderator on the site
If you make this auto load when opening excel I will buy this product. :D
This comment was minimized by the moderator on the site
Hi, Andrei

Thanks for your comment, your suggestion has been fed back to the developers, if there's an upgrade, I'll let you know in the first time. 😄
This comment was minimized by the moderator on the site
Very Good Service Nice blog
This comment was minimized by the moderator on the site
Hello, Thanks for sharing this informative blog with us.
This comment was minimized by the moderator on the site
This feature is great. Bear in mind I had an existing Excel file where this button was ALWAYS disabled. I had to copy-and-paste the data out of the file and save it into a new file to get the "Reading Layout" button to enable. It then worked fine.
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.🙂
This comment was minimized by the moderator on the site
se eu compra a licença consigo instalar mais de uma vez no pc ou só serve uma vez ?
This comment was minimized by the moderator on the site
This solved one of my biggest headaches. I have one program that outputs a report that when exported to Excell it creates 200 worksheets! I have never been able to use it until now. Merging all of them into one worksheet only takes a few minutes with Kutools.
This comment was minimized by the moderator on the site
Thanks A lot of this product, mainly its use for reading layout & shortcuts of left side menu
This comment was minimized by the moderator on the site
My OS: Windows 7 Pro fully updated My Excel: 2010 My sheet: Range R1C6:R504C6 is in use PROBLEM: READING LAYOUT FAILS TO FILL ROW AND COLUMN SELECTED 1. Magnification: 60% 2. Rows 313-355 show 3. Cell R354:C6 selected 4. Column 5 fills to row 323. Row 354 no fill 5. Mag to 50% 6. Rows 311-357 show 7. Column 5 fills top to bottom. Row 354 fills left to right 8. Mag to 60%. Goto 4. 9. Mag to 70%. 10. Rows 319-354 show 11. Column 6 fills to row 325. Row 354 is empty. 12. Click R354:C6 13. No change! 14. WHY? NOTE: At 60% magnification selecting any cell on visible sheet on rows greater than 323 demonstrates same problem. Selecting row 323 or lower i.e R320 the function works as expected with row and column selected but only to row 323!
This comment was minimized by the moderator on the site
Hello,

Please try to update to the latest version. We have enhanced it.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations